The dynamic push-through anchor for an economical serial installation at medium load level.

Dynamic-anchor FDA

The fischer dynamic-anchor FDA is processed with the injection mortar FIS HB. The anchor has general building regulations approval for dynamic applications in cracked concrete. Because of its cone shape is us suitable for fixing moderate load levels of dynamic loads indoors. The preinstalled threaded rod and the push-through installation allow rapid progress and predestine it for economical series installation. Platform lifts and conveyor systems, for example, are fixed with the Dynamic-Anchor FDA.
Product variantsDownload of image data

Product variants

Szűrő
Szűrő
Engedélyek / vizsgálati jelentések
4 termékváltozat
Drill diameter
Anchorage depth
Thread
Width across nut
Amount
GTIN (EAN-Code)
Jelmagyarázat = Van engedély = Nincs engedély
A (z) 4 változatok 4 megtekintése

The advantages / Product description

Advantages
  • Medium load level for a variety of applications.
  • Pre-assembled anchor rod for fast installation.
  • Assessed safety acc. to ETA.
  • Easy push-through installation leads to cost effectiveness – especially for serial installations.
  • Tight assortment with the size.
  • Less spacings and edge distances.
  • Drill holes are sealed.
  • The ETA for static and quasi-static loads allows the use also for the anchoring base steel fiber concrete.
Youtube VideoYoutube VideoYoutube Video

Application and approval

Applications
  • Hydraulic ramps
  • Conveyor belts
  • Industrial robots
  • Cooperation robots and -parts
  • Guide rails for elevators
Building materials
  • Concrete C20/25 to C50/60, cracked and non-cracked
  • Steel fiber reinforced concrete
You can find detailed information on building materials in the registration document.
Approvals
  • ETA-20/0206
  • ETA-06/0171
  • DoP No. 0199
  • DoP No. 0353
  • (2103/12/12) - CM

Assembly instruction

Functionality
  • The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
  • FDA is approved for push-through installation.
  • Extruding the mortar causes the two components to be mixed and activated in the static mixer.
  • The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
  • The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
  • During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
Mounting Strip 1 Picture
1 / 10

Documents for download

  • ETAs and DoPs
  • Approvals and Certificates
  • Technical documents
  • Sales materials
European Technical Assessment for fischer Dynamic-Anchor FDA - Post-installed fasteners in concrete under fatigue cyclic loading
Created on 29/06/2020
Declaration of Performance for fischer dynamic anchor FDA (Bonded fastener for use in concrete)
Created on 16/03/2021
European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete
Created on 10/07/2024
Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)
Created on 23/02/2024
cd-blue-c6785f99-77wnx