fischer Highbond anchor FHB II-A L M12 x 100/25 R

Name: fischer Highbond anchor FHB II-A L M12 x 100/25 R
Brand: fischer

Product variants

Download of image data

Top Features

Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required.
Optimised for low axial and edge distances in cracked concrete.
No drill hole cleaning is required when using a resin capsule. This saves time.
ETA approval for cracked concrete.
Made of stainless steel for fixings used outside.

Art.-Nr. 508000
FHB II-PF 12 x 100
Art.-Nr. 507922
FHB II-P 12 x 100
Art.-Nr. 519125
FIS HB 360 S
Art.-Nr. 078180
BS ø14
Art.-Nr. 062420
RA-SDS
Art.-Nr. 549944
Quattric II 14/160/215 S

The best performance in cracked concrete for maximum tension loads - even outdoors.

Advantages

The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.

The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas.

Functionality

The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

View assembly instructions as PDF

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	115 mm
Anchorage depth ( h_ef )	100 mm
Max. fixture thickness ( t _fix )	25 mm
Thread ( M )	M12
Width across nut	19 mm
Scale parts mortar	7
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4048962078107

fischer Highbond anchor FHB II-A L M12 x 100/25 R

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download