The cost-effective anchor with plastic nail.

Drive anchor DIPK

The fischer render fixing DIPK is ideal for securely fixing pressure-resistant insulation up to 160 mm thick such as polystyrene boards, wood wool lightweight panels and PU panels in concrete, solid and perforated brick. When using solid building materials, the GFK nail has to be shortened at the tapered breakage point. The render fixing DIPK comprises a white plug sleeve with attached disc and a glass-fibre reinforced plastic nail. The DIPK is inserted using a hammer. This saves time and money. The glass-fibre-reinforced plastic nail reduces the heat transmission and prevents marks on the plaster surface.
Varianty výrobkuDownload of image data

Varianty výrobku

Filtr
Filtr
12 variant výrobku
Drill diameter
Min. drill hole depth
Min. effect. anchorage depth
Anchor length
Max. fixture thickness
Disc ø
Zobrazeno 12 z 12 variant

Výhody / popis

Advantages
  • The glass-fibre-reinforced plastic nail (GRP nail) reduces the heat transmission and prevents marks on the plaster surface.
  • The simple hammerset installation allows a quick installation process and thus reduces workload.
  • The well-proven design with low anchorage depth reduces the amount of drilling required, thus achieving a high level of efficiency.
  • The DIPK can be used universally in rear-ventilated curtain façades, as well as in plaster façades.
  • The surface of the anchor plate is suitable to use as a plaster base.

Použití a certifikáty

Applications
To fix pressure-resistant insulating materials in façades, such as:
  • Polystyrene boards
  • Light building boards made of wood wool
  • Cork boards / coir matting
  • PU panels
Building materials
  • Concrete
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Solid brick
* Bližší informace hledejte v certifikačních dokumentech nebo žádejte na našem technickém oddělení.
Certifikáty
  • EPD-FIW-20210314-CBD1-EN

Návod k montáži

Functionality
  • Non-bearing layers, such as adhesive and/or old render, are to be included in the anchor's useful length.
  • The DIPK is set in push-through installation by using a hammer.
  • In solid materials the GRP nail needs to be shortened at the predetermined breaking point.
  • Driving the nail into the anchor shaft causes the DIPK to expand in the base material.
Mounting Strip 1 Picture
1 / 4

Dokumenty ke stažení

  • Sustainability
EPD - Environmental Product Declaration
pdf, EPD-FIW-20210314-CBD1-EN
Environmental Product Declaration for fischer Insulation fixings
Platí od 22/02/2022
do 21/02/2027
cd-blue-c6785f99-ht6vq